CID A-A-2855
2.5 Type I blades shall be equipped with a metal backing strip securely attached to the side opposite the cutting edge.
2.6 When viewed on top of the cutting edge along the full length of the blade, each cutting edge shall be straight to within 0.0015 inch (0.04 mm) full indicator reading (FIR). The cutting edge shall be parallel to the opposite side to within 0.003 inch (0.08 mm) FIR, when measured from the cutting edge to the opposite edge of the blade and at three equally spaced intermediate locations. The blade surface shall be flat to within 0.003 inch (0.08 mm) FIR, when measured from one end of the blade to the other end.
2.7 The finished surface of each blade, including the beveled cutting edges, shall be coated with a protective film that will prevent corrosion. The protective film shall not have any ingredient which will cause skin irritation.
2.8 The finished blade shall exhibit no evidence of jagged or rough work. The blade shall be free from defects which may affect its serviceability or appearance.
3. Certification. The contractor shall certify that the product offered meets the salient characteristics of this description, and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices and is the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
4. Preservation, packaging, packing, labeling, and marking. Unless otherwise specified, preservation, packaging and packing shall be to the degree of protection to preclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc., involving shipment from the supply source to the receiving activity, plus reshipment from receiving activity, and shall conform to applicable carrier’s rules and regulations. Intermediate and external package quantities and labeling and marking shall be specified in the contract or order.
Preparing Activity
GSA-FSS
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business